Search Result for " replacing ac evaporator in 1994 chevy truck" :

1998 Chevy Truck Evaporator Core Service and Repair Page 1

32

Filed Under (Chevrolet) by admin on 23-01-2012

mounting bolt. 4. Take away the left and right entrance speaker grilles. Take away the center instrument panel sound insulator. 5. Remove the left side instrument panel sound insulator. Disconnect the park brake launch cable. 6. Remove the knee bolster. Remove the lower left instrument panel mounting bolt. 7. Remove the BCM. Disconnect the driving force side SIR. Remove the instrument panel cluster. 8. Take away the radio. Remove the HVAC control…

1998 Chevy Truck Evaporator Core Service and Repair Page 2

26

Filed Under (Chevrolet) by admin on 29-01-2012

or core meeting to the vehicle. 4. Install the bolts which retain the evaporator case to the bulkhead. Tighten the bolts to 4.5 N.m (40 lb in). 5. Install the condenser to the evaporator line fitting. Install the accumulator. 6. Install the evaporator case bolts and screws. Tighten to 2.5 N.m (24 In in). Set up the blower motor resistor. 7. Install the evaporator case warmth protect, if equipped. Set up the appropriate fender. 8. Join the electri…

Ford Truck Bed Liner Installation Instruction

49

Filed Under (Ford) by admin on 09-08-2012

tress liner into all the creases, corners and tight spots in the bed. Using the roller, apply the bed liner to the better-to-reach areas. Enable to dry (in a single day, if potential). Repeat this process for the second coat. 5. Follow the instructions above to line the tailgate. When making use of the bed liner, it’s best to maintain in on a drop material so as not to spill the mattress liner on the floor, grass or wherever you might be wo…

Ford F-Series Water Pump Installation Instructions

26

Filed Under (Ford) by admin on 04-08-2012

ay the coolant reservoir hose from the fan shroud. 5. Loosen the fan clutch assembly with the special fan clutch removal tools. Rotate the fan and clutch meeting slowly counterclockwise until they release from the water pump. 6. Place the complete assembly into the hole the fan shroud came out of. Remove the fan clips from the fan shroud, if it has any. Remove the Water Pump 1. Elevate the Ford F-series truck with a jack, using jack stands to sho…

Ford Truck Windshield Installation Instructions

20

Filed Under (Ford) by admin on 20-12-2013

…d have somebody aid you catch it from the skin front of the truck. 5. Clean the new gasket, the windshield frame, and dashboard with a wet cloth. Put the brand new gasket in a heat place to melt it and make it extra flexible. 6. Spread a layer of sealant on the gasket channel, bottom half only. Slide the gasket across the windshield. Be sure you put the side with the slit dealing with exterior of the Ford. 7. Spread a layer of petroleum jelly int…

Ford F-Series Fuel Tank Installation Instructions

29

Filed Under (Ford) by admin on 12-03-2013

amage. Activate the automobile battery by plugging within the battery floor cables. Replenish your tank with fuel to be able to take a look at drive it. Restore gas stress by protecting the tank with the fuel tank filler cap. 6. Check underneath your Ford truck for any attainable fuel leaks. Take a look at the wiring on or around the fuel tank to make sure none of it is loose. If all the things is in working, start your automobile to see how the…

Ford Truck O2/Oxygen Sensor Installation Instructions

38

Filed Under (Ford) by admin on 20-04-2013

…th three wires. If yours is a unique sort, it can have one or two wires. The part is just like a spark plug. 4. Unplug the oxygen sensor’s electrical connector. 5. Take away the sensor using a sensor socket and ratchet. 6. Set up the new unit by hand first to avoid injury to the threads. Then use a torque wrench and sensor socket for closing adjustments. Torque the sensor to 36 ft.-lbs. (46 Nm). 7. Plug the Oxygen Sensor electrical connecto…

Ford Trucks Brake Rotor Installation Instructions

34

Filed Under (Ford) by admin on 05-11-2012

…lts from the aspect of each rear brake caliper. The bolt heads are on the edges closest to the center of the truck, so you may need to show the rotors a bit by hand to succeed in them. Do not pull the calipers off right away. 6. Get some nylon ties or bungee cords, carefully take away the calipers one by one and droop them both from the undercarriage of the truck. Guantee that there is no stress on the brake line main into either caliper. That is…

Ford Truck Emergency Brake Installation Instructions

29

Filed Under (Ford) by admin on 27-05-2012

rake shoes. 5. Lubricate the brand new footwear for the parking brake on the points the place they’ll contact the damage pad. Install the new brake shoes and ensure they’re centered with respect to the brake pads. 6. Fasten the springs, pins and screws for the brake footwear, and join the parking brake cable. Use a torque wrench to tighten the screws to the correct torque. Take away the retaining pin on the brake cable, and regulate t…

Ford Truck Child Safety Seat Installation Instructions

37

Filed Under (Ford) by admin on 17-03-2014

he back part of the car seat. 4. Fasten the safety belt into its fastener in the truck with the belt buckle pointing up. The belt is fixed once you hear a clicking sound. 5. Place the entrance seats into the upright position. 6. Activate the automatic locking mode for that seat belt. This button could be discovered on top of the seat belt’s plastic cover if your specific models has this feature. 2002 and Older Ford Truck Models Child Safety…

You might also likeclose