Search Result for " diagram of egr valve on 2002 ford focus" :

Ford Explorer EGR Valve Installation

31

Filed Under (Ford) by admin on 08-01-2012

…ts with your socket wrench and pull the valve from the intake manifold. 6. Utilizing a thin metal paint scraper, make certain the previous gasket that sat between the EGR valve and the consumption manifold is totally removed. 7. Lay the brand new EGR valve gasket into place and insert the new valve into the intake manifold. Re-install the EGR valve mounting bolts and hand tighten. Now, re-join the tubes and hoses that you just removed and exchang…

Ford EGR Valve Replacement Instructions

34

Filed Under (Ford) by admin on 27-04-2013

izing a wrench or ratchet and socket. 6. Discard the outdated gasket and clear the intake and valve mounting surfaces from outdated gasket material utilizing a plastic scraper, if you’re reinstalling the same EGR valve. 7. Set up the EGR valve in place using a new valve gasket and start the mounting bolts by hand however don’t tighten them yet. Start the pipe threaded fitting by hand to keep away from harm to the threads. Then tighten…

Toyota Camry EGR Valve Removal and Installation Instructions

40

Filed Under (Toyota) by admin on 23-02-2012

…ove the Evaporative Emissions (EVAP) management hose from the hook positioned on the EGR valve. 4. Unplug the vacuum hose or hoses from the EGR valve. 5. Detach the EGR valve utilizing a ratchet, ratchet extension and socket. 6. Take away the EGR valve and gasket from the engine compartment. Toyota Camry EGR Valve Removal Instructions 1. Set the brand new EGR valve and new gasket in place. 2. Start the EGR valve mounting bolts and/or nuts by hand…

Ford Focus Amplifier Installation Instruction

28

Filed Under (Ford) by admin on 21-03-2013

…ing retailers on the back of the Ford’s inventory stereo. 6. Plug the patch cables into the wiring harness adapter leads. Discover the diagram in the wiring harness adapter’s guide for proper connection locations. 7. Feed the patch cables via the again of the Ford’s stereo dock to the ground of the vehicle on the passenger’s side. Slide the factory stereo into the Ford’s stereo dock until it locks into place inside t…

Ford Focus Water Pump Removal and Installation Instructions

33

Filed Under (Ford) by admin on 13-11-2012

ant on the brand new water pump and place the new gasket over this. Hold the gasket in place on the pump as you mount it on the engine, where you removed the old pump. 2. Maintain the water pump in place as you secure it with 4 new bolts. Tighten every in any order with 13 foot pounds torque. Reassemble the rest of the components within the order you took them off the Ford Focus. Exchange any parts that appear worn or broken as you go. 3. Replace…

Ford Focus Brake Pads Installation Instructions

34

Filed Under (Ford) by admin on 01-02-2012

f the brake caliper and take the previous Brake Pads out of the caliper by hand. Spray the within of the caliper with brake clear to remove any brake dust after which lubricate the caliper slide with the white lithium grease. 7. Retract the brake caliper piston with the caliper piston tool (you can purchase a caliper piston device at your native auto parts store). 8. Insert the brand new brake pads, in the identical route and orientation as the p…

Ford Focus Oxygen/O2 Sensor Installation Instructions

28

Filed Under (Ford) by admin on 20-04-2013

…t the propane torch and warmth the area of pipe across the O2 sensor to broaden the pipe. Take away the O2 sensor as soon as the pipe expands sufficient to launch it, however then permit ample time for the pipe to chill down. 7. Screw the new O2 sensor into the porthole within the exhaust pipe and tighten with the ratchet and socket. Watch out not to over-tighten. Plug the wire back into the connector, gather the tools and crawl out from beneath…

Ford Focus CD Player Installation Instructions

33

Filed Under (Ford) by admin on 06-06-2013

en it clicks on both sides. 5. Connect the wiring harnesses for the four wire groups into the CD player. (In any order). 6. Slide the CD Player into the faceplate installation kit opening until flush with the face of the kit. 7. Reconnect the grounding cable to the Focus’ battery. Replace the cable clamp around the negative battery lead. Tighten the bolt with a 10 mm tool until the clamp cannot be moved by hand….

Ford Focus Alternator Removal and Installation Instructions

28

Filed Under (Ford) by admin on 04-01-2012

…d on your engine. 5. Disconnect the wiring for the alternator on the alternator’s electrical connectors. If the wiring is secured with a bracket, unbolt the bracket with the wrench earlier than you disconnect the wires. 6. Remove the mounting bolts for the alternator utilizing the wrench and lift it off of the engine block. Keep in mind where every mounting bolt went as you’ll need to install them in the same locations. Ford Focus Alt…

Ford Focus Fuel Tank Installation Instructions

20

Filed Under (Ford) by admin on 08-03-2013

…hten the rear wheel nuts with a torque wrench as a lot as doable or until the wheel nuts can’t flip any further. Refill your fuel tank with the gas out of your fuel container and then join the destructive battery cable. 7. Restore stress to your tank by putting on the fuel filler cap. Verify your automobile for any leaks or free wiring. If you don’t see anything, take a drive to check how it runs with the brand new fuel tank….

You might also likeclose