Filed Under (Ford) by admin on 30-10-2012
…of the faceplate adapter. 4. Connect the leads of the wiring harness adapter to the retailers on the again of the aftermarket stereo/radio. Slide the aftermarket stereo into the opening offered by the Ford faceplate adapter. 5. Place the negative battery cable clamp across the detrimental lead put up of the Ford battery. Tighten the bolt on the clamp with the ten mm wrench so that the clamp can not move freely in regards to the lead post….
Filed Under (Ford) by admin on 01-11-2012
l the manufacturing facility stereo from the sprint whereas sustaining the outward pull on the keys. The radio will slide forward from the dashboard till the wiring connections are accessible on the rear of the pinnacle unit. 5. Pull every of the wiring groups from the back of the Ford Taurus’ inventory radio. The wiring is sure collectively by white plastic binders. Pull the plastic binders from the outlets; don’t pull the wires. 6….
Filed Under (Ford) by admin on 11-11-2012
…the Escape. 4. Remove the trim panels at the bottom of the door openings with a trim panel elimination tool. Lift the carpeting and route the ability cable to the rear cargo space of the Ford. Change the trim panels by hand. 5. Remove the Ford stereo. Place the DIN elimination tools into the stereo removal holes located on both side of the stereo’s face. Pull the tools outward whereas pulling the stereo from the dash. Pull the stereo far e…
Filed Under (Ford) by admin on 12-01-2014
…to the dash. Run the wiring through to the front of the opening and connect it to a wiring harness adapter. Attach the wiring harness adapter results in the brand new stereo. Plug the antenna wire into the aftermarket stereo. 5. Put the brand new stereo into the faceplate adapter package till it snaps into place. 6. Replace the battery cable clamp onto the destructive lead publish and tighten it with the screwdriver….
Filed Under (Ford) by admin on 20-03-2013
…he Ford aftermarket faceplate adapter into the stereo dock while feeding the stereo wiring and antenna cables by the again of the adapter. Plug the white plastic stereo wiring connectors into the wiring harness adapter leads. 5. Plug the wiring harness adapter lead connectors into the shops on the rear panel of the new aftermarket head unit. Plug the antenna cable lead into the antenna input on the back of the brand new unit. 6. Slide the new hea…
Filed Under (Ford) by admin on 22-11-2012
…till they lock into place. 4. Pull the keys outward while simultaneously pulling the stereo from the dashboard of the truck. Pull the stereo far enough from the sprint to reach the wiring connections at the rear of the radio. 5. Pull the stereo wiring from the again of the deck. The wiring is grouped together with white plastic wire binders. Pull the binders, not the person Ford stereo wires. 6. Insert the set up kit sleeve into the empty stereo…
Filed Under (Ford) by admin on 27-10-2012
n sleeve; on other models use a faceplate adapter.) 4. Join the wiring harness adapter leads into the again of the brand new radio. Plug the antenna cable into the FM antenna outlet on the rear panel of the aftermarket radio. 5. Place the again of the new stereo at the opening of the stereo mounting dock. Slide the stereo straight into the opening until the stereo snaps into place in the dock. 6. Exchange the grounding cable clamp over the unfavo…
Filed Under (Ford) by admin on 16-04-2013
…4. Plug the wiring harness adapter lead connectors into the retailers on the precise facet of the brand new stereo’s rear panel. Insert the antenna cable lead into the FM antenna outlet on the left aspect of the radio. 5. Slide the aftermarket radio into the set up sleeve till it snaps into place within the dashboard stereo dock. Place the faceplate of the stereo onto the unit (for removable face radios only). See the radio’s accompa…
Filed Under (Ford) by admin on 23-05-2013
…sleeve into the dock. 3. Pull the stereo wiring and antenna cable from the again of the Ford’s stereo dock. 4. Plug the plastic stereo wiring binders into the corresponding lead connectors of the wiring harness adapter. 5. Insert the harness adapter lead connectors into the outlets on the rear panel of the brand new deck. The connectors will solely match into the right retailers positioned on the left facet of the stereo’s rear panel….
Filed Under (Ford) by admin on 06-11-2012
…uitable outlets on the back of the brand new stereo. Consult the aftermarket stereo’s manual for locations of the wiring outlets. Plug the antenna cable into the antenna outlet on the rear panel of the brand new stereo. 5. Slide the brand new unit into the stereo faceplate adapter. Push the unit into the sprint till it locks into place. Return to the Ford’s battery. 6. Place the destructive battery cable clamp over the destructive bat…