Search Result for " 2001 f150 5 4 water crossover removal" :

Ford F-150 Water Pump Removal and Installation Instructions

22

Filed Under (Ford) by admin on 15-11-2012

se until the clamp is loose. The water pump is situated on the entrance of the engine block dealing with the fan. 5. Pull each hose away from the water pump meeting by hand till the hoses are disconnected from the water pump. 6. Take away the four bolts connecting the water pump pulley to the water pump by turning them counterclockwise with a socket, socket extension and socket-wrench whereas the fan-drive belt is still installed. 7. Take away th…

Ford Explorer Water Pump Removal and Installation Instructions

30

Filed Under (Ford) by admin on 10-01-2012

…l the radiator with the quantity and type of coolant laid out in your owner’s manual. 4. Take away the jack stands and launch the jack. Attach the negative battery cable to the put up and tighten the screw on the clamp. 5. Begin the engine and verify for leaks. Then, close the hood and take the SUV for a test drive….

Ford F-250 7.3 Diesel Water Pump Removal Instructions

26

Filed Under (Ford) by admin on 10-06-2013

…m the radiator then tighten the drain valve. 2. Open the hood. Remove the overflow hose from the white plastic coolant tank on the high of the engine with a pair of pliers. Remove the three holding screws from the tank with a 5/16-inch nut driver. Take away the tank from the engine bay. 3. Take away the upper radiator hose by squeezing the clamps with a pair of pliers while pulling the hose from the radiator and the water pump. Place a ½-inch rat…

Ford Focus Water Pump Removal and Installation Instructions

33

Filed Under (Ford) by admin on 13-11-2012

ant on the brand new water pump and place the new gasket over this. Hold the gasket in place on the pump as you mount it on the engine, where you removed the old pump. 2. Maintain the water pump in place as you secure it with 4 new bolts. Tighten every in any order with 13 foot pounds torque. Reassemble the rest of the components within the order you took them off the Ford Focus. Exchange any parts that appear worn or broken as you go. 3. Replace…

2001 F-150 Intake Manifold 5.4L Removal Procedure

25

Filed Under (Ford) by admin on 15-11-2012

2001 Ford F-150 Intake Manifold 5.4L Removal Procedure : 1. Disconnect the battery ground cable (14301). 2. Relieve the fuel system pressure. 3. Drain the engine cooling system. 4. Take away the engine air cleaner (ACL)(9600) and the air cleaner outlet tube (9B659). 5. Compress and slide the hose clamp and disconnect the upper radiator hose. 6. Take away the accelerator cable snow shield. Remove the bolts. Remove the accelerator cable snow shiel…

Ford F-Series Water Pump Installation Instructions

26

Filed Under (Ford) by admin on 04-08-2012

ay the coolant reservoir hose from the fan shroud. 5. Loosen the fan clutch assembly with the special fan clutch removal tools. Rotate the fan and clutch meeting slowly counterclockwise until they release from the water pump. 6. Place the complete assembly into the hole the fan shroud came out of. Remove the fan clips from the fan shroud, if it has any. Remove the Water Pump 1. Elevate the Ford F-series truck with a jack, using jack stands to sho…

Ford 7.3 Turbo Diesel Water Pump Installation Instructions

42

Filed Under (Ford) by admin on 20-02-2012

ose. Reinstall the serpentine belt and tighten the four pulley bolts. Elevate the fan shroud and fan into the engine bay. Reattach the fan shroud bolts. Utilizing the fan nut wrench, reattach the fan to the water pump pulley. 6. Reinstall the coolant tank and upper and lower radiator hoses. Remove the cap from the coolant tank and add 4 gallons of antifreeze, four gallons of distilled water, and one bottle of coolant conditioner. Screw the cap ag…

2001 F-Super Duty 250-550 Wheel Hub Removal Procedure

30

Filed Under (Ford) by admin on 05-04-2013

ub extender nuts, the hub plate and the rotor. Take away the eight hub plate nuts. Take away the hub plate. Take away the rotor. 5. Take away the hub lock. Take away the retainer ring. Pull outward and take away the hub lock. 6. Take away the axle shaft thrust washers. Remove the snap ring. Take away the three thrust washers. Vehicles equipped with ABS 7. sensor from the bearing. Disconnect the ABS wheel sensor harness. Disconnect the connector….

Ford Windstar Water Pump Installation Instructions

29

Filed Under (Ford) by admin on 14-04-2013

…so that you can push it towards the rear of the van. Take away the accessory drive belt when done. 4. Remove the water pump pulley with the correct-sized wrench. 5. Detach the drive belt tensioner with the socket and ratchet. 6. Take away the lower radiator and heater hose from the water pump with a flat head screwdriver to loosen the clamps. 7. Unscrew the bolts from the water pump with the socket and ratchet then pull it away from the engine. 8…

2001 Lincoln LS Intake Manifold Removal Procedure

40

Filed Under (Lincoln) by admin on 26-10-2012

wl vent screen. Take away the engine compartment brace. Disconnect the accelerator and velocity management cables. 5. Disconnect the vacuum hoses. Disconnect the vacuum line. Disconnect the EGR valve to exhaust manifold tube. 6. Remove the EGR valve. Remove the 2 bolts. Take away the valve and discard the gasket. 7. Disconnect the camshaft position (CMP) sensor electrical connector and separate the connector from the fuel injection provide manifo…

You might also likeclose